EMP160 can be used on its own or can be used to fill in corners or detailed sections on larger or more complex moulds before the main reinforcement is added. Whether you are working on an area where you just can’t remove water and moisture or you want the white color for your repair, PC-11® is your choice. Turning off the personalised advertising setting won’t stop you from seeing Etsy ads, but it may make the ads you see less relevant or more repetitive. Pigment has already been added to the basecoat resin at 10% which is at the upper end of how much pigment can be added to a resin but if you wanted to experiment with making increasing the intensity of the pigment further then you could try adding up to a maximum of an additional 5% by weight of this pigment to the basecoat.

Use a solvent such as methylated spirit, acetone, rubbing alcohol or lacquer thinner to smooth applied PC-7.This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction. Alongside but not touching, make a rounded mound of the same circumference, adding or taking away until the height matches the mound of part A. Being an epoxy based mould making system, EMP60 is ideally suited for use when making epoxy based end products (like carbon fibre parts or epoxy matrix GRP/FRP). The ratings/reviews displayed here may not be representative of every listing on this page, or of every review for these listings.

However, for mixing purposes we always recommend adding the pigment to the resin part BEFORE adding the hardener to allow you plenty of time to properly mix, so that means you will just need to plan ahead slightly so you know what your total resin and hardener mix will weigh. If you are also looking to create some beautiful pieces of art, these are the right items for you to achieve the desired choice of shade and look. Centrecoat Epoxy Paste Adhesive has a high level of mechanical integrity and exhibits excellent bonding characteristics even under damp conditions. Remember to use a different spatula/tool in each tub or wipe it off with methylated spirit on a cloth/kitchen roll in between! You can achieve different outcomes from the various shades, including a sparkly look, a rise and float impression, a transparent appearance, and super-bright fluoro.

However the fibrous nature and potential for small air voids means that the machined surface may not be perfectly smooth so may need additional finishing depending on the end application. Choose PC-7® if you want to: seal a crack in a wall, attach a hanger to a ceramic plaque, seal a leak in an oil pan, repair a granite monument, fix a leak in PVC pipe connection, create a multimedia sculpture, and thousands of other repairs. All you need to do is ensure that when you make the mould, your flanges are big enough to give you room to lay up the bagging stack and have somewhere for the resin feed and vacuum outlet to be positioned.