The Ei3024 is fitted with a large central Test/ Silence button to facilitate frequent testing of the alarm and system. The silence function allows the alarm/ system to be silenced in the case of a false/ nuisance alarm and low battery/ fault beeps. SmartLINK compatible - plug in an Ei3000MRF module for wireless interconnection, data extraction and real-time notifications of alarm activations and events via the SmartLINK Gateway and Portal. The Ei3024 Multi-Sensor Fire Alarm is fully compatible with all other Aico alarms and accessories whether a system needs upgrading or an existing system needs expanding; and works with either hard-wired, RadioLINK or hybrid interconnecting systems.

If it is a regular single beep (approximately once every minute), then the battery may be running low, and you may need to change the battery in the alarm. This is relevant for the 140RC Series alarms. Most of our alarms have a 10-year life, after which they should be replaced to ensure you carry on getting the best protection. There is likely to be Carbon Monoxide present. Turn off any gas appliances, open windows and doors and leave the property. If you have more than one alarm in the property and they are interconnected, this will also trigger all the other alarms in the property. The Ei3024 is powered by 230V AC mains. In the event of mains failure, the rechargeable 10 year built in tamper-proof lithium cells will provide up to 3 months power supply in the case of a wireless RF installation or up to 6 months in any other case.This is the Aico Ei3024 is a multi-sensor fire alarm with enhanced optical smoke sensor and automatic dust compensation; it delivers a faster response to a wider range of fires. This multi-sensor alarm detects both smoke and heat from a fire, and so the location is ideally in the hallway, landing, living room, and bedroom areas.

SmartLINK compatible. Simply plug in an Ei3000MRF module to enable wireless interconnection, data extraction and real-time notifications of alarm activations and events via the SmartLINK Gateway and Portal. A large Test / Silence button is fitted to the alarm enabling frequent testing. The silence function allows the alarm / system to be silenced in the case of a false alarm and low battery / fault noises. If the alarm contains AudioLINK – Once the alarm has stopped activating and it is safe to enter the property extract a report to identify the details of the incident. Smoke alarms have different sensors to detect different fire types. With the Ei3024 Multi-Sensor Fire Alarm sensor choice is simple as this alarm provides total fire coverage. Its combination of a Heat and an Optical sensor means that it can detect all fire types. The memory feature allows an Alarm that has previously activated to be easily identified (through the red flashing LED).This alarm is a multi-sensor fire alarm - it contains both optical and heat sensors to provide a total fire coverage. The intelligent software it has installed allows it to detect all fire types (TF1 to TF6 & TF8) surpassing traditional single sensor Alarms. In addition, the chamber design, integrated insect screen and unique dust compensation algorithm reduce the risk of false alarms. Intelligent integrated software enables the device to detect all fire types (TF1 to TF6 & TF8) which surpasses conventional single sensor alarms. The risk of false alarms is also greatly reduced with its smoke chamber design, integrated insect screen and automatic dust compensation. If you are using an Alarm Controller Ei450 this will continue for as long as you hold down the ‘Test’ button. Insert a flat headed screwdriver into the removal slot of the alarm. This is marked with an arrow. Make sure you keep the screwdriver horizontal (i.e. parallel to the ceiling). Above this is the ‘Replace By’ date, but note that the date on the label shows the maximum life of the alarm and alarms should always be replaced before their life is up.

You will know when you need to change the battery, as you will hear a single regular beep (low battery warning) coming from the alarm, however it is recommended that you change the battery every year. Never ignore a beeping alarm, as it is a warning sign of either a danger in the home or that an alarm needs maintenance.

Find out first about offers and news

Smoke alarms have different sensors to detect different fire types. With The Aico Ei3024 Multi-Sensor Fire Alarm sensor choice is simple as this alarm provides total fire coverage. Its combination of a Heat and an Optical sensor means that it can detect all fire types. The Aico Ei3024 Multi Sensor Fire Alarm is built on the same high quality, reliable and proven technology that all Aico Alarms are renowned for, but contains the latest high-tech enhancements making it the most effective domestic fire alarm on the market. The Ei3024 can operate as a standalone Alarm or can be interconnected either by hard-wire or wirelessly (using the EI3000MRF module) enabling it to communicate with compatible Ei Alarms and accessories. Up to 20 devices can be interconnected. If you’re not sure about quantities, sizes or have any other questions about your electrical wholesale products, our Electrical2Go sales team will be more than happy to help. Give them a call now on 01424 220384. KEY FEATURES