topic_prefix>/status the entire device status as response to status_update published on <...>/command Home Assistant will display a repair issue for the Shelly device if push updates from this device do not reach the Home Assistant server. Generation 1 “Shelly 4Pro” and “Shelly Sense” are not supported (devices based on old CoAP v1 protocol) If Shelly devices are in a different subnet than the Home Assistant server, you should ensure communication on UDP port 5683 between these subnets.

SNTP synchronizes your device's system time with a server that has already been synchronized by another source. There is already a set server, which is the default one - http://time.google.com, however if there are any problems, you can easily change it and enter a new one in the text box. Changing this setting will reboot the device. ADVANCED DEVELOPER SETTINGS If you think your Shelly devices are working correctly and don’t want to change your network/configuration, you can ignore the repair issue. Still, you must know you are giving up the best experience of using first-generation Shelly devices with Home Assistant. We developed Shelly Dimmer 2 to be able to cover all possible electrical installations all over the world. Shelly Dimmer 2 can be used in houses where the neutral line is missing and provides a full set of dimming functionalities. You can control a wide range of halogen lights, dimmable LEDs and ferromagnetic transformers. FeaturesSunset / Sunrise: The Shelly device may turn on/off automatically at sunrise/sunset, or at a specified time Before/After Sunrise/Sunset. Select the time in hours and minutes from the dropdown menus. Auto on: After turning off, the relay output will be automatically turned on after a predefined time (in seconds). Also, the Shelly Dimmer 2 is really small. Even smaller than the Shelly 1 relay. Shelly Dimmer 2 next to a quarter Shelly Dimmer 2 installation Now, plug off your device. You will receive a message false indicating the device was disconnected abruptly.

If Home Assistant is running as a virtual machine or service on an operating system other than Home Assistant OS, you should open UDP port 5683 on the device’s firewall and/or ensure that communication from this port is redirected to the Home Assistant service. This setting makes your Shelly device discoverable to other devices such as your mobile phone or PC. CALIBRATION Auto on: After turning off, the relay output will be automatically turned on after a predefined period of time (in seconds). The integration uses Device Name to name its entities if the device has only one relay or no relays at all.Shelly Plus I4 AC & DC: http://A.B.C.D/ota?url=http://rojer.me/files/shelly/shelly-homekit-ShellyPlusI4.zip Note: The Shelly must have installed 0.10.0-beta3 or above to be flushed, please update first! If the BUTTON TYPE of the switch connected to the device is set to momentary or detached switch, the integration creates an event entity for this switch. You can use this entity in your automations. Event entities (generation 2) This function requires a working connection to the Internet, so the device can synchronize the time. It allows you to create, view, edit, and delete schedules.