Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use. The Sceptre’s Battery Capacity LED clearly shows current battery charge and when it’s time to recharge the 1400mAh battery via microUSB. The key to great vaping is in the coils! Choose low wattage 1.2ohm MTL or higher wattage 0.5ohm RDL coils, then adjust the airflow on the side of the pod to match your vaping style. The Sceptre detects the coil and adjusts the wattage automatically. Press the button, or puff to activate the Sceptre, and vape your way! You can't really adjust the airflow but for me they're perfect the way they are for both mtl and rdl. Some of the colours look stunning – but the honeycomb paint effects look a bit strange as there is just a random splash of colour which makes it look like some of the paint has chipped off.

The pod is refillable via the side fill port and the coil is replaceable. Choose the coil to suit your vaping style… The flavour is strong and clear and with the boost power level I am getting a great throat hit too. Meet the Innokin Sceptre II Kit, the newest addition to the Sceptre range of vape kits. With many improvements on offer, this lightweight device guarantees a high-quality and enhanced experience for all types of vapers. Change power level – turn off the device and hold the power button in. The lights above the button will change colour. The green light is the standard power level and the purple light is the boost power mode. Release the power button when the light illuminates for the power mode you want. It will cycle between both power modes when you hold the button down. For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.

Verdict

There is only one way to install the pod – it will not even attempt to enter the housing if the wrong way around.

I found using a 1A charging plug it took just over 2 hours (2 hr 8 mins) to fully charge the battery. How To Remove the Innokin Sceptre Pod

INNOKIN SCEPTRE MTL CARBON FIBER EDITION KIT

As usual this will vary according to your own vaping habits, power level, coil resistance etc. But to give you a guide… The 5-ohm mesh RDL coil works at 18 or 20 watts and is designed to deliver a restricted direct-to-lung hit with lower-nicotine e-liquids. One of the issues with the original Sceptre that me and many others struggled with was the coil quality. Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Above and below the fire button are two different finishes, the Purple version for instance has a plain pale Lilac bottom half and a stripy Lilac and Purple top half.

Now onto the 0.5oHm coil which on the normal setting gives you 18W,and on boost gives you 20W. Loaded with Strawberry Milkshake, I gave it a whirl. I found my best settings were against with the boost and you can really choose with this coil what kind of vape you want. You can get a nice tight MTL draw from this with the airflow shut down, or you can get an equally nice RDL draw from it with the airflow fully open. I found myself using the airflow fully open for a nice restricted direct to lung vape with nice flavour, but I do wish the boost had added more than 2Wto give a warmer vape, but it was still a really nice smooth vape. Colombo was a cigar smoker, he often had one in his hand, but would the Sceptre 2 convince him to vape. There’s been a murder, would he reach for a vape? Well, as you know, Colombo always gets his killer. He’s a master of working it all out forensically, piecing all the clues together, working it all out until he knows for sure who did it. There’s no loose ends with Colombo at all, he a genius! We all love him even though he’s not perfect, and that’s how I feel about the Sceptre 2, it has it’s faults, but they are minor really compared to the quality of vape. As before you have 2 power levels – the left hand LED indicator lights up Purple (Boost power level) or Blue for Normal power level. You can change between the two settings.Connect the microUSB port to a quality power supply and ensure the device is charged. The Sceptre can be turned on by pressing the main firing button 3 times rapidly. Plus I have 2 of these kits on the go (not using any other devices) and the other coil lasted 12 days. 0.5ohm Coil Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged. The button might seem in an awkward place considering it's on the side when you hold it but I don't use it when vaping. Only to switch it on and off. The device activates when you inhale and I prefer it that way. I've found on rdl it can be a bit temperamental and not activate but that could also be because I'm not used to rdl. Works perfectly on mtl. Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.