A Light reflective coating that dries to a silvery finish the product reflects the sun's rays and keeps the roof and any other surface that's coated in it much cooler so extending the life and the temperature of the surface below it is specifically designed for application over primed metal walls and roofs to reduce heat absorption. Everbuild 907 5 Litre tin of thin bituminous based aluminium heat reflective protective paint a brushable consistency which dries to a silvery Reflective finish. One 5ltr tin did the whole roof 3 x 13 mtrs long, so 33 square mtrs, I can highly recomend this product, it can be used on other parts of a roof such as lead flasings or anywhere there is heat/cold expansion/contraction issues. Read full review Bitumen paint, adhesives, and primers are ideal for areas that need to be made waterproof and robust enough to face the elements. While bituminous coatings are most commonly used for outdoor surfaces, such as roofs, metal guttering, railings and fences, some items in our range can also be used indoors for certain applications. This paint is best applied to clean and dry surfaces that are dust free, as well as free of dirt, oil, grease and loose material. Stir the paint before use and regularly while applying. Two coats can be applied by brush or mohair roller, and the second coat should go on when the first is dry (after one to two hours). Your tools can be cleaned with white spirit after use and you should wipe spillages away before the paint sets.

Paint the inside of each lap with 905. Bridge any small gaps and make sure that the membrane is not pulling too tight.Solar Reflective Paint is a thin bituminous based aluminium protective paint of brushable consistency which dries to a silvery finish. The product is specifically designed for application over primed metal walls and roofs to reduce heat absorption. Over recently applied bituminous coatings, allow the following minimum period to elapse after the final coat has dried before applying this product: Prolongs life of roof repairs and bituminous coatings, which would otherwise be degraded by UV light. Apply two coats of 905 to the warm side of the wall. Make sure to avoid pinholes. Once dry, apply the insulation over the top of it.

Apply the first coat of 905 to a clean and receptive surface then apply a glass membrane straight after whilst still wet. Protects your roof from Heat Damage the number one cause of damage and premature ageing of the roof surface. Apply two coats by brush or mohair roller, the second coat being applied as soon as the first coat is dry It's very easy to apply as it's quite thin, roller is best goes on a goldish brown colour and within a minute the aluminium in it comes to the surface leaving the highly reflective finish. Apply two coats by brush or mohair roller, the second coat being applied as soon as the first coat is dry (1-2 hours).Over recently applied bituminous coatings allow the following minimum period to elapse after the final coat has dried before applying this product