Decking Rescue Paint 2.5L Deep Blue [39147]

Product Information

We try to use the best value couriers available, and we will endeavour to get your products to you as quickly and as cost effectively as possible. Non Slip Deck Coating is a durable coating for deck areas - contains fine granules for a non-slip finish. Erm ok sorry about that, I wasn't aware of this and was wondering who is this mysterious "John" everybody is talking about on this forum ! T.A Paint is a family run company and are proud to have a long running heritage in the world of paint, as we are now in our 4th generation holding a combined experience of 100 years plus.

Recommended use : As an intermediate and finishing coat in anti-slip systems on interior and exterior surfaces above water-line. Abraid area prior to painting to remove old flaking paint and imperfections, abrasion will also assist the paint bonding and provide a good key to unpainted substrates. Please note images and product titles are for advertising purposes only, tins are supplied in BC Paints cans or plain white for, 1 and 2.Depending on what you're painting, apply a second coat 2-12 hours or an overnight dry after the first coat to build good colour and protection. International Interdeck is a slip-resistant polyurethane deck paint consisting of fine mineral additive to create a hard-wearing, non-slip surface ideal for decks and other walked on surfaces.

Due to the oil type of T A Paint’s Single Pack Polyurethane Marine Boat Deck Enamel, the coatings is able to overcoat a wide range of old coatings without attacking it.Two Pack Epoxy Marine Deck Paint is suitable for use on primed metal and direct to fibreglass/GRP decks where excellent chemical resistance and protection from harsh environments is required. I think this is a question for treadmaster directly - the only thing that may be an issue is how the paint reacts to the material of the Treadmaster. and never pre seal the floor prior to painting espesally with laytex or PVC selaers paint will not stick. Please complete the full form and then press submit at the bottom of the page to complete application.

When thinned with the correct thinner after a day it had cured 100%, was hard and had a much better finish.Rememberdo not apply Two Pack Epoxy Paint in temperatures below 10 degrees centigrade cross linking of the paint and catalyst will not take place and the coating will never fully dry.