Everbuild Black Jack 908 D.P.M. (Damp Proof Membrane), Black, 5 Litre

Product Information

Gloss paints and other oil or alkyd based paints must not be used directly over a surface treated with EVERBUILD BLACK JACK 908 D. All phases of the installation should comply with BS Code of Practice 102: 1973 – protection of Buildings from the Ground/Section 3. When dry, a sand cement or concrete screed of approximately 50mm thick is then laid over the EVER-BUILD BLACK JACK 908 DPM membrane. We also specialise in the Self Build market and can offer our support and knowledge from the very start of your project to the final stage.

It can also be used as an adhesive for wood block, mosaic panels, insulation boards, expanded polystyrene, cork and as a plaster bonding agent, even on difficult surfaces.This membrane also waterproofs walls, above-ground structures and foundations, and makes a good adhesive for wood blocks, mosaic panels, insulation boards, expanded polystyrene and cork. Tamped surfaces are not suitable owing to the difficulty of ensuring adequate coating over the high spots.

Everbuild 908 DPM is a rubber enriched bitumen emulsion which provides a highly-effective sandwich damp proof membrane for floors. Not only does it offer a high quality damp proof membrane for floors, but its excellent water resistant and water vapour barriers also acts as a waterproofer for walls, above ground structures and foundations.A coat should be applied to the porous base and the insulation material placed whilst the EVERBUILD BLACK JACK 908 DPM is still wet.