Infinity Dodecahedron, Creative and Cool Infinite Dodecahedron Color Art Light Night Light, Spiral Space LED Light Adjustable Color Light, Furniture Decoration Table lamp Soft Dimmable Lighting (A)

Product Information

Because we will be soldering the LED strings whilst on the frame, I suggest using a higher temperature plastic such as PETG, the mirrors are quite heavy if you use glass so the extra strength is also a bonus.

The main advantage over an Arduino is being able to switch animations on my phone over wifi instead of uploading new code to the microcontroller. By putting 12 reflective acrylic pentagons in a dodecahedron shape sticking 420 LEDs inside I made the infinity effect shown in the pictures. Unfortunately, it's a one way conversion, so if you wanted to hook up any inputs (ie buttons) to pins D5-D8 you need to bypass the LLC. If you are experienced with cutting acrylic you could try to cut them by hand from an acrylic sheet.The ratings/reviews displayed here may not be representative of every listing on this page, or of every review for these listings. At Inluxid we combine art, design, and engineering to create mesmerizing lighting products and installations. Soft Dimmable Lighting】You can change the color of the light through the button on the USB line to meet all the styles you want.

To account for this, we need to ‘jump’ a total of 9 times within the data loop to cover all edges of the shape. If you would like to use custom or alternative LEDs you may need to change the dimensions of the frame. If everything's good, the dodecahedron should begin cycling effects (make sure your are using the wall adapter for power). Make sure the polarity is correct; positive and ground are indicated on the PCB with +, - respectively.I programmed the LEDs in the Arduino IDE and used WLED code with custom animations on an ESP8266 similar to the infinity table project. Most people connect the strips with wires, but this quickly gets tedious, especially at smaller sizes. All struts can be printed flat on the build plate with no supports, these pieces are long and thin and can sometimes warp and curl up at the ends. I did this by putting wires inside the 3D prints and having the lights branch out from the main path.