Cooler Master MasterBox NR200 Mini ITX Computer Case - Compact SGCC Steel Chassis, Tool-Free 360 Degree Accessibility - NR200 Black

Product Information

Ocuk Limited trading as Overclockers UK is a credit broker, not a lender, and is Authorised and Regulated by the Financial Conduct Authority. Screws are used to secure the frame parts to allow advanced disassembly and multiple angles to easily work inside of the chassis.

Cooling support includes a 92mm fan on the rear, 2x 120mm fans on the top, 2x 120mm fans and a 240mm radiator on the bottom, 2x 120/140mm fans or a 240/280mm radiator on the side, and two liquid cooling pump locations.

The manual could be a bit clearer about clearances and dimensions, as this is very cruital in these compact ITX cases where everything is fighting for space. The MasterBox NR200P uses features normally found in stylish, high-end ATX cases and cleverly utilizes space-saving measures to create a chassis taking up less than half the volume. PCPartPicker may receive compensation for purchases made at participating retailers linked on this site. Not only will you choke the GPU, but you are also removing any potential for additional air flow because there is no point of installing the side radiator bracket if you have a tempered glass side panel.

However, vertical GPU mounting is really where the NR200P shines because we have a very short riser cable included that you can use when you go with a vertical GPU. Triple slot GPUs are supported with a maximum length of 330mm and maximum width of 156mm allowing the fitment of large high-end graphics cards. Couldn't get my 280aio to fit properly so I stuck it back where it was on the side and added more fans up top to pull the hot air out (t30s) and it's much better than the factory fans. The only limitation here is that you cannot install the side fan radiator bracket if your CPU tower clearance is higher than 155mm. And by the way, they both come with a 92mm fan that you can mount at the back in case you are not using the vertical PCIe slots.I’m really excited to use this for my future small-sized desktop PC that is not for gaming, but for work only. Putting in the parts was challenging as expected of ITX cases, but being able to remove all panels made it a lot smoother and fun than I anticipated.

All external vented panels and top mounted fans are secured with pins for easy removal, facilitating quick access to the internals without the use of tools. That case also comes with a tempered glass panel for those wanting to show off their setup but again, it's easy enough to slide the panel off. The real advantage with the vertical GPU mount is the opening up of all that space at the bottom for a really thick radiator with fans. You'll be able to install a CPU tower cooler as tall as 157mm, up to 3-slot graphics cards 330mm in length, along with two 120 top-mounted fans and the aforementioned liquid-cooling radiator up to 280mm long.You can also mount a hard drive on the side radiator bracket, which by the way can support dual 120mm or 140mm fans or a 240mm or 280mm radiator. COMPACT CASE, SERIOUS CAPACITY - Within its robust SSG steel casing, the MasterBox NR200 supports mini-DTX and mini-ITX motherboards (max.

You can mount a 155mm tall CPU cooler (153mm if using the tempered glass panel) and a 3-slot graphics card as long as 330mm with a maximum width of 156mm. Open ventilation and multiple fan mounts ensure proper and consistent airflow, while large mounts keep the front of the case clear of obstructions. SFF builds became much more popular in large part to the NR200, and it remained one of my top recommendations when friends asked me for mini-ITX case suggestions. If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag.radiator support, 155mm CPU cooler height limit, ample ventilation, and 7 possible fan mounting locations provide multiple cooling options whether air or liquid-cooled.