You'll save 10% on your Hive Radiator Valve(s) today and you can cancel Hive Heating Plus at any time. You’ll need to be competent in electrical wiring and DIY to install a Hive Thermostat Mini yourself.

Then set the Temperature you need and this Thermostat will keep you heater at this temp :-) This DIY tool made off stuff lying around is used by me to heat up Heaters such as Hot End and Heat Beds from 3d printers. I want to swap my existing Honeywell BDR91 wireless thermostat receiver on my combi boiler for the Hive receiver.

Got a new hive thermostat yesterday as well, and somewhat confused to find it won’t stand up by itself cos of little sticky out bit at the bottom. Designed to attach to the Hive Active Thermostat's base plate via 3 M4 pan head bolts (see picture) - 6-10mm long should work fine (I use 12mm in the picture as I happened to have some lying around). The receiver talks to the Thermostat which then talks to the Hive hub which is ethernet connected to the router.

In this case, your heating will switch off but you can temporarily switch it on by pressing the heating button on the front of the receiver. It keeps an eye on how you’re heating your home and provides personal suggestions to help improve efficiency and achieve your savings target. Hive Thermostats work with most oil boilers and can replace your existing conventional thermostat or programmer. AIEVE Stand for Hive Thermostat,Stands Holder Mounting Bracket Accessories Compatible with Hive Active Heating Thermostat,Replace of Wall Mount(White) https://www. I'm not sure, but it also looks like the ESi series 6 use the same style of connector so that might work.You can’t control your water temperature with the thermostat but you can turn your hot water on or off, set a schedule or boost it (which turns the hot water on from 5 minutes up to 6 hours). The yellow/green wire is exclusively reserved as a CPC or earth wire, the regulations prohibit it's use for any other purpose even if it is identified with tape, sleeving or numbers.

Fitting was easy enough, plug the bridge into the router, set it up via the app, remove the esi thermostat and backplate (revealing a standard back box in the wall) and wire up the tado backplate. You can also use the thermostat stand (available separately) to position it on a table or shelf within your home. I've read about decorative plates but can't actually find any online and don't know if these are for the thermostat to attach too so then it is mobile or if the playe is just to cover the wall behind and the thermostat back is still screwed to the wall too? If your internet connection goes down, the thermostat will continue to work and you'll be able to use your thermostat to turn the temperature up and down as normal. I work away from home a lot so would definitely be interest in a straight swap for something more WiFi enable to control remotely.Key lesson for me was the connectivity back to the router and the short range requiring the (dedicated) signal booster. I fitted my first hive a couple of weeks ago and I thought it was the most stupid thing to fit in the world, absolutely no instructions in any of the three things you have to fit. Yes, preferably at the other end to the thermostat so that there are no redundant live wires floating around. If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. Europe's busiest forums, with independent news and expert reviews, for TVs, Home Cinema, Hi-Fi, Movies, Gaming, Tech and more.