Remote Control Replacement for LG NB2420A NB3520A NB3520A2 NB3520ANB NB4530B, Remote Control for LG AKB73575421

Product Information

If you don’t immediately hear the TV’s sound, then you need to go to your TV’s sound or audio settings and turn off your TV speaker. It should be under ‘TV speaker’, ‘speaker list’, or something similar. On this same list, you should see an option for “HDMI Arc” or something similar. Select this option to tell your TV to route the audio channel through the soundbar. When Using Optical:

Hisense TVs can also control your soundbar through the HDMI ARC connection. After connecting the two with an HDMI-certified High-Speed 2.0 cable go to your TV Settings > Sound > Speakers > ARC. This turns off your TV speaker and enables HDMI ARC. When using an optical connection, the setup is the same as the instructions above. After your optical cable is connected to both your soundbar and TV, you will go to the TV settings, turn off the TV speaker, and change the source to ‘Optical’. The digital optical and HDMI ARC connections are made just like the instructions above. You’ll use the Sound > Sound Out area to change the output to HDMI or optical.When connecting through ARC, your TV may automatically recognize your connection after inserting the cable. Otherwise, use the menu on your VIZIO remote and go to System > CEC, then change the setting to ‘Disabled’, ‘Enabled’, or ‘ARC only’, based on your needs. Using HDMI ARC, you will connect your soundbar’s ‘HDMI OUT’ or ‘HDMI OUT (ARC)’ to the ‘HDMI IN (ARC)’ on your TV. With an HDMI ARC connection, your soundbar’s source will automatically change to TV ARC, then you can use the TV remote’s right direction on the direction pad to activate/deactivate Anynet+, which only works with an HDMI ARC connection.

Sony TVs can be connected to a soundbar through the HDMI ARC connection, an optical digital audio cable only, or with both an HDMI and optical digital audio cable. All of the setups are the same as the instructions listed above. When switching the audio output setting, you’ll select ‘Audio System’ for all setups. After the reset, you still need to properly re-establish the connection between your TV and the soundbar to guarantee seamless and effortless functioning. How to Reset Your LG Soundbar Without Remote If your TV and soundbar have both options, you may be wondering which one you should be using. If so, there’s some more discussion about that in another one of our articles. Once you’ve decided which on to use, keep working through the directions below. Press the “ Input” and “ Bluetooth” buttons on your LG soundbar and hold them in place for 10 seconds. After you release the buttons, the soundbar will reset. Method #2

You want to find a range that allows you to use the TV remote for the volume most of the time, and this usually means setting the soundbar at somewhere between 50-80% of its maximum volume output. With a digital optical connection to the soundbar from your Samsung TV, hold the left direction on the Samsung TV remote’s direction pad to activate or deactivate Auto Power Link, which only works with an optical connection. Be sure to also change the TV’s audio output settings, so the soundbar will be controlled by your TV remote.

You can also restore your soundbar to its default settings by going for a hard reset. To achieve this: Most TCL TVs come with HDMI ARC, so this should be your preferred connection for connecting and controlling your soundbar with a TCL TV remote. Make sure to use a high-speed HDMI cable that supports ARC and CEC control. When using an optical cable, there’s a small chance that the Television will know to use the soundbar automatically, but it’s more likely that you’ll have to go find the Televisions speaker selection menu and change it as described above. An HDMI ARC connection makes controlling your soundbar from your TV remote simple, and after your connection is made through the cable, you should immediately be able to hear your TV’s sound coming through your soundbar. We’re using the power button (ON/OFF) and the Bluetooth button this time around. Like in method #1, press and hold the two buttons for about 10 seconds, then release your hold afterward. Your soundbar will be reset. Method #3Most people don’t know it is possible to reset your LG soundbar without the remote. However, It is quite possible, and it’s a very straightforward process. Let’s take a look at the different methods of achieving this. Method #1 After connections have been made and settings have been adjusted, you may need to adjust the soundbar’s volume to optimize the sound now that it is controlled through the TV. While each TV brand’s method of connecting to and controlling your soundbar is slightly different, it’s fairly straightforward to connect the two. Here’s a breakdown of what you need to do to control a soundbar with your TV remote. Find the Optical or HDMI ARC Connection on both the Soundbar and TV Hitachi is known for its low-priced smart TVs, which often come with Roku TV built-in. Connecting your soundbar to a Hitachi Roku TV is the same as if you use your Roku remote (no matter your TV brand) to control all of your TV and media.