Plastic can come in many different sizes as well as shapes and can be found in almost all homes. Sometimes, these plastic items need a little repair work, so it may be a good idea to keep some epoxy specifically for plastic around the house. You need to know when that plastic pipe under the sink might spring a leak. For best results ensure the bodywork or part you are working on and the Putty are at room temperature before you start the repair (approx 17°C to 21°C). Apply activator (if applicable). If you are using an activator, apply it to both surfaces unless otherwise indicated. Wait until it has dried completely, then proceed with the adhesive. Yes, epoxy adhesive offers many benefits including heat-resistance, chemical resistance as well as water resistance. Great to use on those plastic plumbing problems. As you wrap the tape around the damaged area of pipe, it will bond to both the soil pipe and itself to form a solid rubber band over the leak area. This band provides a high pressure repair; multiple tapes when used together can hold up to 30bar.

If you do get some epoxy onto your skin, the best thing is to act fast. You can either use a cloth dipped into some vinegar and placed over the area or some acetone on the tip of an earbud. Rub onto the adhesive until it comes off. A tip when using epoxy putty, keep your gloves moistened, this will help to make it easier on application and creates a smoother look. Whenever you are dealing with adhesives, you will need to match it with the material you are working on. Here are a few examples:If you do want to reinforce your repair, then consider buying a pipe repair kit as opposed to individual items. Kits come with both the sealing material and a bandage at a cheaper cost than when buying items individually.

Clean area to be filled/repaired thoroughly; remove all traces of dust, silicone, polish, wax, dirt, grease etc.(use a cleaner non-injurious to paint work) - we recommend using the E-TECH Technik Surface Deep Cleaner ER00102.

\n\t\t\tIsopon Plastic Bumper Fillers - 100ml Tube

Allow the Putty to fully cure/harden for approx 30 minutes at room temperature. It may take longer to cure in cooler temperatures or if the correct ratio of Putty to hardener is not exact. Both waterproof pipe repair tape and plastic repair epoxy putty will provide you with a long-lasting soil pipe repair. You can reinforce the seal provided by either of those materials with a pipe repair bandage wrapped over the top. Apply adhesive. Apply it sparingly to one surface and press the parts together immediately. Hold in place until the bond sets. Do not reposition parts.

When dealing with epoxy that has hardened may be difficult but not impossible. You will first have to soften the epoxy with an adhesive remover. You can also try denatured alcohol or paint thinners. Take a cloth that has been dipped into the remover and wipe the affected area. You should be able to remove the resin without leaving any residue, especially if you have used the correct adhesive remover. Always work in a ventilated space and wear gloves to avoid getting onto your skin.

In many cases that include plastic repairs, you need to find a compatible adhesive. You should be able to find out what plastic and adhesive works best together by reading the product label. Prepare adhesive and activator (if applicable). Open the adhesive and, if relevant, the activator according to the manufacturer’s instructions. Yes, epoxy is a great choice when it comes to using on plastics, as it will create a strong adhesive bond. They augment the structural strength of the plastic and also provide, provide chemical resistance, and offer a certain amount of flexibility. However, all products are not the same, so you will have to search for the correct one for your project. Gather materials. Get together all the plastic pieces you want to join. You’ll also need and your adhesive, of course, tissue paper, something to protect your work area, and sandpaper (for bonding smooth surfaces).