The search for the best components available on the market, due to the desire to build machines that last over time, guarantees, for each model, the best we can offer. Professional acrylic sheet bending machines with under heating, consisting of easily adjustable profiles with heating wires. The machines are modular built and is already prepared internally so that it can be easily extended with multiple heating profiles and/or control units.

Plastic Bending Machine | Plexiglas Bender- Plexibend Plastic Bending Machine | Plexiglas Bender- Plexibend

We believe that the added value lies in guaranteeing constant assistance to our customers. Conscious of how exorbitant a machine stop can be, we are always active to reduce the resolution time of every problem. This working length adjusting set is used to create partially cold or hot zones without covering the heating wire.It is only really affected by extreme heat. It does have to be very hot for the acrylic to become damaged or distorted. The cold does not really affect acrylic at all. You can even insert electric components in acrylic tubing.

Plastic Bending Machines for Acrylic, PVC and Polycarbonate Plastic Bending Machines for Acrylic, PVC and Polycarbonate

Digital parts counter, with stop function, counting divided by batches and visual and acoustic work signaling. Very productive modular constructed plastic bending machines with double side heating and electronic timer. All of this allows them to achieve perfect bending. But, also, it is possible to reach a 100% custom-made machine for each project with the SHANNON bending machine accessories. We need to connect electrical wires from the heating wire to the connectors on the controller where MOTOR is written. And power supply wires goes to connectors where POWER is written.The heating wires in the profiles are adjustable in height and very precisely adjustable in temperature by digital unit. In this instructable / video I am going to show you how you can make simple, cheap and very useful acrylic bending tool. It opens new possibilities and ways you can work with acrylic. Thank you. I thought to wrap the aluminum channel with an electronic polyimide tape, but it was not neccessary, as the channel never vent above 95c and shorting the wire is really hard with a basic protection. One of the reasons acrylic is a good material when it comes to outside displays is because it is very resistant to the elements. For attaching the wire I used a spring at each end and the wire was attached to the springs, not by soldering, but by twisting the wire ends around guitar string 'ball ends' (which are used to hold guitar strings in the bridge). In this way I could pre-manufacture wires that I could use to easily replace a broken wire in seconds, without the need for soldering.