Joined in 2023 
82 
63 About this deal
Keracolor Ultracolor wall and floor grout is a high performance, fast setting, mould-resistant and water-repellent grout that's available in 20+ colours! When resistance to acids or, where extreme cleanliness or sterile conditions are required, use a suitable acid-resistant epoxy grout. Save for the express warranties contained herein, the Company makes no conditions, warranties or representations, express or implied, in fact or in law, including but not limited to, any implied warranties of satisfactory quality, merchantability, fitness for a particular purpose, title and non-infringement, all of which are expressly excluded to the fullest extent permissible by law. For residues that have cured on the surface over time or if residues persist then use UltraCare Epoxy Off Gel, special highviscosity cleaner to remove epoxy residues. Mapei Ultracolor Plus 100 White Grout (2kg bag) is an anti-mould and water repellent grout, suitable for walls and floors, both internally and externally.
When the mix is partially set, after 50-60 minutes, a damp Scotch-Brite® sponge or an abrasive felt disc may be passed over the joints to even out the surface.
This operation may be also carried out with a single disk rotary machine with special Scotch-Brite® type felt disk. Mapei Ultracolor Plus is for internal and external grouting of floors and walls in all types of ceramic (double-fired, single-fired, klinker, porcelain, etc. With Drop Effect Technology, and Anti Mould with Biotech Technology, Suitable for most areas including those with heavy traffic, i. The Company shall not be liable for its failure to perform any of its obligations to you where such failure is caused by circumstances beyond the Company’s reasonable control. Not only is it mould-resistant and water-repellent, ensuring your surfaces stay hygienic and healthy, but it also boasts anti-efflorescence properties for uniform colour.
High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect® and mould-resistant BioBlock® technology for grouting joints up to 20mm wide. Rinse the sponge frequently, using two different containers of water: one to remove the excess mix from the sponge, and the other, containing clean water, to rinse the sponge. Notwithstanding the foregoing, nothing in this clause shall seek to exclude or restrict the Company’s liability for fraudulent misrepresentation.
The terms of the Agreement shall override and supersede any previous negotiations, agreements or arrangements between you and the Company.
Fast setting and drying, high performance, anti-efflorescence grout, polymer modified, for joints from 2 to 20 mm. After the finishing operation, it is very important that no traces of Kerapoxy Easy Design remain on the tile surface. The remedy provided in this Clause 8 is without prejudice to the other provisions of this Agreement.After grouting with Kerapoxy Easy Design, floor and wall coverings must be cleaned while the grout is still “fresh”. High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect® and mould-resistant BioBlock® technology for grouting joints up to .
Our products are available in powder or ready mixed formulas or adhesives, suitable for interior or exterior use. BioBlock technology applied to this product blocks various types of mould from forming and proliferating on the surface of the grout in humid conditions. This bag of 5 kilos will grout a standard mosaic area of approximately 2 square meters or 22 square feet with joints of 2mm.
No addition, alteration, substitution or waiver of these terms will be valid unless the Company has expressly accepted this in writing.
Great Deal 
New Comment