The Fast Transition tab is only available when in General setup section 802.11r Fast Transition option is enabled. Auto | 1 (2412 MHz) | 2 (2417 MHz) | 3 (2422 MHz) | 4 (2427 MHz) | 5 (2432 MHz) | 6 (2437 MHz) | 7 (2442 MHz) | 8 (2447 MHz) | 9 (2452 MHz) | 10 (2457 MHz) | 11 (2462 MHz); default: Auto Next window that opens will be Device Configuration. Values there, mostly, should be left unchanged to avoid connection problems, because they are dictated by Access Point. Other than that, only difference from Access Point settings are in Interface Configuration → General Setup section, where Mode is set to Client, and Network attached to this wireless interface is wifi1 instead of LAN Fixed provider information and IMSI value representation when SIM and modem cannot provide this information

Please note: this product change notification does not affect any previous RUT955 devices, except new RUT955 devices.

Unstructured Supplementary Service Data (USSD) is communication protocol used in communication between cellular devices and mobile network operators. It is usually used with prepaid SIM cards to enable/disable certain services or to obtain information from a network operator. Fixed preserving the contents of /etc/luci-uploads/ after FW upgrade with the 'Keep all settings' option the entire procedure may take a very long time and includes a reboot at the end; exact time will vary depending on the size of the MSD (larger size will take longer; for example, using a 128 GB drive will take about 2 hours to fully set up, while a 16 GB will only take about 5 minutes). Fixed default networks in WAN firewall zone and possibility to add a network that is not yet created Do not attempt to disassemble your device (exemptions for devices that require disassembly for SIM insertion) or its accessories: it does not contain any user-serviceable parts. For safety reasons, the equipment should be opened only by qualified personnel.

By default, the lists are empty. A set certificates generated using 'Simple' file type would look something like this:

Panorama Antennas EF-W24 Easyfit WIFI Adhesive Antenna with Reverse Polarity SMA Plug - 3m

RTS/CTS (Request to Send/Clear to Send) are mechanisms, used to reduce frame collisions introduced by the hidden node problem. It can help resolve problems arising when several access points are in the same area, contending When RUT955 is configured as mesh gateway it provides internet access to other mesh nodes. When configured as mesh node it acts as a mesh router which forwards traffic to and from mesh gateway. Nodes also connect other wireless devices to the network such as laptops and cellphones. Generation creates additional 'signing request' files (which appear under the Certificate Manager tab) that are later used to sign the generated certificates. When this option is set to 'on', the device deletes the signing request files after the signing process is complete. Effective February, 2019, week 7, RUT955 routers will be produced with significant visual design improvements.

The unit must be powered off where blasting is in progress and explosive atmospheres are present or near medical life support equipment. The Add New User section is used to create additional users that can access the WebUI. After a new user is added, it will appear in the Users section. Expanded the data that is sent to the Cumulocity cloud with device log, mobile data usage nd GPS data Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. The Sign the certificate slider control whether the certificate will be signed automatically or manually after the generation is complete.

MikroTik GPS Antenna with SMA Connector

Fixed Routing/NAT Offloading section display in Network -> Firewall -> General Settings when device is not supported The General section is used to configure SIM card parameters that define how the device will establish a mobile connection.

This device meets the official requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by authorized agencies. The device must be used with a minimum separation of 20 cm from a person’s body to ensure compliance with RF exposure guidelines. Failure to observe these instructions could result in your RF exposure exceeding the applicable limits. Added additional AT commands for troubleshooting: AT+CGPADDR AT+QGMR AT+QCFG="NWSCANMODEEX" AT+QCFG="BAND" AT+QNWINFO AT+QENG="servingcell" AT+QENG="neighbourcell" APN (Access Point Name) is configurable network identifier used by a mobile device when connecting to a carrier Fixed mac80211 vulnerabilities CVE-2022-41674, CVE-2022-42719, CVE-2022-42720, CVE-2022-42721, CVE-2022-42722

The SIM Card Settings section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section. Any external antenna gain must meet RF exposure and maximum radiated output power limits of the applicable rule section.